Zini Sport Boat - Printable Version +- Fishing Forum (https://bigfishtackle.com/forum) +-- Forum: Introductions (https://bigfishtackle.com/forum/forumdisplay.php?fid=406) +--- Forum: Introductions Board (https://bigfishtackle.com/forum/forumdisplay.php?fid=295) +--- Thread: Zini Sport Boat (/showthread.php?tid=462907)

Zini Sport Boat - ollieraye - 01-07-2009 I just bought one of these Zini Sport boats on ebay. This is the one that is in 3 pcs and pinned together at the hinges. I think I got piped.... The aluminum is either 22 or 24 guage, it measured .062", I deducted .010" for paint thickness. The U.S. Coast Guard rating sticker is in question. I have also gotten in touch with the original designer's of this boat and they are annoyed that this boat is currently being built in China. The wood that is glued to the inside of the transom is a piece of 1/2", or even 3/8" plywood. If I had seen this vessel before I bought it, I wouldn't have. [signature] Re: [ollieraye] Zini Sport Boat - macfly55 - 01-07-2009 hi ollieraye and welcome to the BFT.. first I want to thank you for taking the time to register and post here on this forum.. it is appreciated.. I am not sure which boat you are talking about but sorry you seem to of gotten taken in this deal.. hopefully all will work out in the end.. and to your best interest.. again.. thank you for the post and the info on this boat.. we look forward to future posts from you.. MacFly [cool] [signature] Re: [ollieraye] Zini Sport Boat - Dryrod - 01-07-2009 [center][font "Garamond"][#008000][size 4]Hi there oillerraye and welcome to the BFT.[/size][/#008000][/font] [center] [signature]