Jon boat rivet work repair - Printable Version +- Fishing Forum (https://bigfishtackle.com/forum) +-- Forum: Misc. Fishing Forums (https://bigfishtackle.com/forum/forumdisplay.php?fid=335) +--- Forum: Fishing Boats (https://bigfishtackle.com/forum/forumdisplay.php?fid=70) +--- Thread: Jon boat rivet work repair (/showthread.php?tid=733342)

Jon boat rivet work repair - Paulpro - 04-03-2012 I used the o'l block and hammer technique,did each rivet the old fashin way,used 1/4 rivets.For the original size,some fit loose,so I went up a size.Used V- rod from homedepot "aluminum" Made some washers for each side out of the old seat.Yes I removed my middle seat,and then added haul re-inforcement,by adding two ribs using the existing holes from the middle seat.Now I have over 5 1/2 feet of usefull deck space[shocked][#008000]P.S[/#008000] also here is where I mount my dual bowmount trolling motors to my bow! last pic..Its that time of year again,so get ready everyone! [signature] Re: [Paulpro] Jon boat rivet work repair - Paulpro - 05-21-2012 Here is another reason why I removed the middle seat,I can row easier ,better position as you can see.I can brace against the back seat with my feet to help me get more power,not that I need it..[] After removing the middle seat, I now have the fastest jon boat rowboat on youtube[]Leave it to Paulpro to show you something never seen before,fastest jon boat... with oars alone!..Paulpro!.P.S.don't mind the Youtube title,its from a video response I made [#0066cc]2:34[/#0066cc] [url "http://www.youtube.com/watch?v=xn1a4zAsQPE"] Pauly's row boat[/url] May 19, 2012 4:41 PM [signature] Re: [Paulpro] Jon boat rivet work repair - tomc - 05-21-2012 lol,your a ticket paul[][] [signature] Re: [tomc] Jon boat rivet work repair - Paulpro - 07-24-2012 rivet work video..no middle seat [signature] Re: [Paulpro] Jon boat rivet work repair - Paulpro - 07-26-2012 boating with kitty [signature]