Fishing Forum
Nils auger head cap modified video - Printable Version

+- Fishing Forum (https://bigfishtackle.com/forum)
+-- Forum: Utah Fishing Forum (https://bigfishtackle.com/forum/forumdisplay.php?fid=386)
+--- Forum: Off Topic Board (https://bigfishtackle.com/forum/forumdisplay.php?fid=112)
+--- Thread: Nils auger head cap modified video (/showthread.php?tid=908990)



Nils auger head cap modified video - Flyfishinglover - 12-21-2014

I just decided to make a video of my modified head that I did recently. Check it out if your sick and tired of the plastic holder to put on every time.

https://www.youtube.com/watch?v=QyA7tYqKtUE&list=UUApJ-CWPnwTFTK6Q0al1rOg
[signature]


Re: [Flyfishinglover] Nils auger head cap modified video - The_Red_Leaker - 12-21-2014

Not a bad idea - battling that strap has made me cuss more then once. Think it would stay on in the back of a truck going down the highway strapped on top of a sled? That's generally how mine rides and would be my only worry.
[signature]


Re: [Flyfishinglover] Nils auger head cap modified video - wyoguy - 12-21-2014

As leaker says a good idea. My Eskimo power auger has a bunjie thing that threads threw from side to side. It works well once it's in place..but a pain to get through. Your idea may work better.
[signature]


Re: [The_Red_Leaker] Nils auger head cap modified video - Flyfishinglover - 12-22-2014

Ya trust me I know how you feel about the Angry squeaking dolphin sounds in the air fighting the plastic part.

If you got a sled that the company doesn't make a sled cover, I just grab an old sleeping bag because my sled is full to the point I can push the sleeping bag inside nice that covers the whole sled, it's tight and never had any problems with it coming undone even when I go with my friends that got a truck..
[signature]


Re: [wyoguy] Nils auger head cap modified video - Flyfishinglover - 12-22-2014

Ya I first tried smaller o rings but they were to weak as well tried to use screws to hold the magnet in place but didn't hold let the magnet hold that well so I just grabbed some wire and got no problems with it. For power auger you might have to do a different way from the body shape but for sure those big O rings in the video is a piece of stress free heaven.
[signature]


Re: [Flyfishinglover] Nils auger head cap modified video - kastmaster - 12-23-2014

Great idea! I ended up replacing my Nils cover with an 8" Strikemaster Lazer Auger cover. You still have to mess with the bungie but the SM cap stays on much better. I thought of doing the same thing but was afraid of nicking the edge of my Nils with a metallic object. Let us know how it works out!