11-01-2009, 06:59 PM
[][]I need to replace the bearings on a 2000 minn kota maxxum electric trolling motor and can't find much on the internet any suggestions? THANKS
[signature]
[signature]
Need help on Minn Kota repair
|
11-01-2009, 06:59 PM
[][]I need to replace the bearings on a 2000 minn kota maxxum electric trolling motor and can't find much on the internet any suggestions? THANKS
[signature]
11-01-2009, 10:12 PM
See if this helps any. I didn't really look through it
[url "http://www.trollingmotorparts.com/Default.aspx?AspxAutoDetectCookieSupport=1"]http://www.trollingmotorparts.com/Default.aspx?AspxAutoDetectCookieSupport=1[/url] [signature]
11-01-2009, 10:16 PM
Here you go:
[url "http://www.bigfishtackle.com/cgi-bin/gforum/gforum.cgi?post=270226;search_string=Minn%20Kota;#270226"]Click here:[/url] [signature]
11-02-2009, 01:02 AM
Ok thanks i will call them in the morning
[signature]
11-02-2009, 01:15 AM
Why are the bearings bad? You don't see that too often. What I have seen is water get inside and freeze up the shaft. I had to tear one apart a few years back and dry it out. Then reseal the bottom end. It still works to this day. Has it been bad for a while or did it just start acting up when the weather got cold?
[signature]
11-02-2009, 02:28 AM
One thing Crofts Power Equipment has moved about one block east. They are now on the corner of 500 west and 1500 South. Looks like a larger building then what they were in before.
[signature]
11-02-2009, 02:56 AM
I dont know why they went bad. The upper ones are just fine but the lower ones are all rusted out and in two pieces. i dont know that much about it but i got it all tore apart and think i can get it back in business if i can get the bearings. I will make a few phone calls tomorrow and get some coming. If all goes well I will be on the gorge soon[cool]
[signature]
11-02-2009, 05:02 AM
i think the bearings are still good ! take them out and re surfuce them, i can help you out with that if you can bring them my way (SANDY) just let me know.
[signature]
11-03-2009, 03:07 AM
Hey thanks for the offer but i found a minn kota service guy in northern utah. He is going to send me new bearings in the mail i just got to send him 9 ot 10 bucks after i receive them[cool] I thought transactions like this were a thing of the past. It made my month talking to this guy[][][][] IT feels alot better than buying them from some company back in Wisconsin (off the internet) for 23 plus 9 for shipping thanks again
[signature] |
« Next Oldest | Next Newest »
|