Posts: 709
Threads: 0
Joined: Jan 2010
Reputation:
0
Update/edit to post: I have a 97 Mariner 125 h 2 stroke motor (OG568369) and the last trip of my season the oil alarm starting going off "beep beep beep". It had full oil. So now that I've pulled the boat out this spring I decided to start digging into it. I drained the oil tank and removed it. When I tip the tank upside down the alarm stops, when I turn the tank right side up, the alarm stops, is this a float or sensor issue?
[signature]
Posts: 33,349
Threads: 418
Joined: Feb 2002
Reputation:
33
Isn't the sensor connected to the float?
[signature]
Posts: 709
Threads: 0
Joined: Jan 2010
Reputation:
0
I believe so. It looks like you can replace the sensor seperately, whereas if the float is bad you have to replace the whole oil tank.
[signature]
Posts: 95
Threads: 0
Joined: Aug 2009
Reputation:
0
Call Lee at Lee marine I'm sure he can help you he's in hyrum
[signature]
Posts: 98
Threads: 0
Joined: Jan 2009
Reputation:
0
The float gets heavy and saturated with oil and settles to the bottom of the tank so the tank will need to replaced in order to repair the problem.
[signature]
Posts: 98
Threads: 0
Joined: Jan 2009
Reputation:
0
The new oil tank is about $90.00
[signature]
