Transducer depth (Other Thread )

[UintaIce]

I have an Eagle portable fishfinder. I rigged a bent rod to go in the 2 rings on the side of the machine. I welded a flange to one end of the rod to fasten the transducer on. With the bend in the rod, the transducer only went about 10" or so into the hole. As long as I make sure that I keep it level, it works great! (I bought a leveling bubble to put on top of the transducer to make that part easier!) And I've fished with it on more than 20" of ice without problems.

Good luck!
[signature]