04-25-2004, 08:31 AM
hi dan heres some info you should find helpful heres a link to the site also
[url "http://www.walleyeguys.com/gnbhook.htm"]http://www.walleyeguys.com/gnbhook.htm[/url]
Need more amp-hour capacity?
Some applications may require more amp-hour capacity than one battery can provide. When that happens, a parallel hook- up of two or more similar 12V deep cycle batteries may be required.
To connect two batteries in parallel, connect the positive post of the first battery to the positive post of the second battery. Then connect the negative post of the first battery to the negative post of the second battery. Now run the leads from the second battery to the equipment to be powered.
![[Image: gnbprl1.gif]](http://www.walleyeguys.com/gnbprl1.gif)
This set up will give you twice the amp-hour capacity (i.e.. 230 amp-hours when using two 115 amp-hour batteries) while maintaining a 12V output
[signature]
[url "http://www.walleyeguys.com/gnbhook.htm"]http://www.walleyeguys.com/gnbhook.htm[/url]
Need more amp-hour capacity?
Some applications may require more amp-hour capacity than one battery can provide. When that happens, a parallel hook- up of two or more similar 12V deep cycle batteries may be required.
To connect two batteries in parallel, connect the positive post of the first battery to the positive post of the second battery. Then connect the negative post of the first battery to the negative post of the second battery. Now run the leads from the second battery to the equipment to be powered.
This set up will give you twice the amp-hour capacity (i.e.. 230 amp-hours when using two 115 amp-hour batteries) while maintaining a 12V output
[signature]