06-22-2004, 09:10 PM
I noticed you bought 27# leadcore. Most leadcore lines have the same amount of lead in them. So the 27# line has a thicker dacron sheath than the 18# line. This means that the 27# line will be thicker and will therefore not run as deep as the 18# line. So if you want to maximize your depth, exchange the 27# leadcore for the 18#.
You will find that leadcore is very speed dependant, and that rules-of-thumb like "5 yards deep per color out" varies drastically depending on your speed. Also, make sure to attach a 50' mono leader to your leadcore. Just hollow out an inch of the dacron by removing the sheath, insert the mono into the sheath, and tie an overhand knot. It's a strong, small knot that will fit through the guides on your rod without a problem.
Also, remember that leadcore doesn't stretch, so loosen your drag and use a light rod with plenty of give.
You will find that leadcore is very speed dependant, and that rules-of-thumb like "5 yards deep per color out" varies drastically depending on your speed. Also, make sure to attach a 50' mono leader to your leadcore. Just hollow out an inch of the dacron by removing the sheath, insert the mono into the sheath, and tie an overhand knot. It's a strong, small knot that will fit through the guides on your rod without a problem.
Also, remember that leadcore doesn't stretch, so loosen your drag and use a light rod with plenty of give.