Boat Help

[JoyRide]

I won't uncover my boat for a couple of weeks. It's tarped and covered with snow. I was able to get to the underside of the deck from the engine compartment. Drill your hole, spin two nuts (so you can tighten them against each other for a lock) on your eye bolt, follow that with a washer then plate or washer around three inches in diameter or so, insert the eye bolt into the drilled hole - on the bolt extending through the underside of the deck put your backing plate, depending on the room you have use the biggest backing plate you feel comfortable with as this will be holding all the stress from pulling the downrigger board snug, follow this with a washer and two nuts, the second a self locking nut.

Caviat .... this proposed installation procedure is only for suggestions and not to be taken as anything else! []

Don
[signature]