09-18-2007, 04:20 AM
I would go with the Cut, Double Dropper Loop set up.
Simply tie 2 Dropper loops. The first one at 18inches from the bottom of the rig and the second one at around 24 to 30 inches above that one.
Cut one side of the loop so that you have a single strand sticking out of the line instead of a loop.
Tie one a #6 mustad 9174 hook. Attatch a 2 to 4oz weight depending on the strength of the waves. Attatch a small sand crab to each of the hooks and be prepared for the pull.
Good luck and please feel free to ask any other questions that you may have.
[cool]
[signature]
Simply tie 2 Dropper loops. The first one at 18inches from the bottom of the rig and the second one at around 24 to 30 inches above that one.
Cut one side of the loop so that you have a single strand sticking out of the line instead of a loop.
Tie one a #6 mustad 9174 hook. Attatch a 2 to 4oz weight depending on the strength of the waves. Attatch a small sand crab to each of the hooks and be prepared for the pull.
Good luck and please feel free to ask any other questions that you may have.
[cool]
[signature]