Winterizing outboards and gear oil

[fairwayphilly]

I run sta-bil in my gas all year long. Most tanks take me more than a month to burn through. The winterizing process for me it to change the oil in the lower unit; if there is any water present in the oil I tear lower unit down and replace seals and gaskets (impellar as well as long as I'm in there), pull the plugs and coat with seafoam, change engine and lower unit oil in kicker, pull, inspect and repack bearings on trailer (even though I've got bearing buddies), pull all fishfinders (units only, not transducers), pull batteries, pull bow mount electric motor. Then in spring when I put batteries and electronics back in boat I check all lights and wiring on the trailer.
[signature]