Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Downrigger advice
#12
[quote D_Luck]Thanks for everyone's input, sounds like the opinions are pretty varied out there. In the end I went with a Cannon Uni-Troll that was on clearance at cabelas, I wanted to look at some scotty's and penn's but cannon was all they had in stock and I got the display one so it ran me 157 bucks.

I am gonna put braid and a snubber on it, does anyone know how to do the voltage box deal (not even sure what it's called) maybe would not be an issue with braid?

Thanks again folks[/quote]

Good call on the Cannon.

There is no voltage issue as long as you aren't running steel cable. The problem with braid is you will cut off your weights if you get to close to the rocks. That can get expensive. I love my steel as it allows me to bottom bounce the weights to trigger a bite.
[signature]
Reply


Messages In This Thread
Downrigger advice - by D_Luck - 02-22-2013, 06:39 PM
Re: [D_Luck] Downrigger advice - by Tazasorus - 02-22-2013, 10:55 PM
Re: [Tazasorus] Downrigger advice - by Kodiak1 - 02-22-2013, 11:03 PM
Re: [D_Luck] Downrigger advice - by Idaho - 02-23-2013, 12:46 AM
Re: [D_Luck] Downrigger advice - by MMDon - 02-23-2013, 01:13 AM
Re: [MMDon] Downrigger advice - by StacyR - 02-23-2013, 01:21 AM
Re: [StacyR] Downrigger advice - by MMDon - 02-23-2013, 03:02 AM
Re: [MMDon] Downrigger advice - by psanders71 - 02-23-2013, 03:49 AM
Re: [psanders71] Downrigger advice - by StacyR - 02-24-2013, 10:34 AM
Re: [StacyR] Downrigger advice - by D_Luck - 02-24-2013, 04:37 PM
Re: [D_Luck] Downrigger advice - by MMDon - 02-24-2013, 05:47 PM
Re: [D_Luck] Downrigger advice - by Lunddude - 02-25-2013, 02:14 AM
Re: [Lunddude] Downrigger advice - by MMDon - 02-25-2013, 02:31 AM
Re: [MMDon] Downrigger advice - by Lunddude - 02-25-2013, 02:47 AM
Re: [D_Luck] Downrigger advice - by PACKFAN - 02-25-2013, 03:00 AM
Re: [Metalheadgene] Downrigger advice - by Mojo1 - 02-25-2013, 04:57 PM

Forum Jump:


Users browsing this thread: 2 Guest(s)