11-19-2013, 02:24 PM
Prop reamers are something I have 
Yeah, longer usually is better for props. It's good to know you've gone clear up to 12".
My current test plan is to go down to a Provo Harbor on a calm day and run tests inside the harbor where there should be very minimal current effects.
And I'll be testing using a single 3S 5.5Ahr Lithium which will be recharged after each test.
A Watt meter will keep track of both Voltage and current so I should be able to control for changes in the input voltage as I test different props.
Thanks again
[signature]
Yeah, longer usually is better for props. It's good to know you've gone clear up to 12".
My current test plan is to go down to a Provo Harbor on a calm day and run tests inside the harbor where there should be very minimal current effects.
And I'll be testing using a single 3S 5.5Ahr Lithium which will be recharged after each test.
A Watt meter will keep track of both Voltage and current so I should be able to control for changes in the input voltage as I test different props.
Thanks again
[signature]