08-11-2016, 01:19 PM
[#0000FF]The only thing it might do is compromise a warranty on a new craft. But it has never proven to cause any structural integrity issues. If there is a concern for the potential for rusting...on a steel frame...you can put a blob of silicone seal on the hole before running the screw in.
The key thing on using the frame is to have a good drill bit for the pilot holes...and use good machine screws. I like 3/4"...8 or 10 by 32.
Have fun and don't hesitate to post any questions or send me a PM if you prefer.
[/#0000FF]
[signature]
The key thing on using the frame is to have a good drill bit for the pilot holes...and use good machine screws. I like 3/4"...8 or 10 by 32.
Have fun and don't hesitate to post any questions or send me a PM if you prefer.
[/#0000FF]
[signature]