08-29-2016, 02:02 PM
[quote Papasan]I have a set of Cannon mini-mag downriggers and I have screwed up their depth meter some way or another. Is there a way to reset them to zero? My math skills are not what they once were-thanks guys[/quote]
If they are like mine you may need to spray some sort of lubricant between the seating surfaces of the counter/housing, my Uni Trolls have never had an issue but for some reason my Mini Mags did, might be due to 2 different older plastics expanding at different rates and cause it to stick. And then you simply wiggle it outward until the gears are not touching and set it to zero with the ball at the surface by turning the notched gear that turns the counter, then push it back inward until the gears line up.
[signature]
If they are like mine you may need to spray some sort of lubricant between the seating surfaces of the counter/housing, my Uni Trolls have never had an issue but for some reason my Mini Mags did, might be due to 2 different older plastics expanding at different rates and cause it to stick. And then you simply wiggle it outward until the gears are not touching and set it to zero with the ball at the surface by turning the notched gear that turns the counter, then push it back inward until the gears line up.
[signature]