09-12-2004, 06:14 PM
[cool][#0000ff]If you use any good search engine, you can find a bajillion sites with bass rigs, knots, etc. Type in either "Texas rig" or Carolina Rig and you can find plenty of diagrams.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]But, to save all that, here's a simplified explanation. I am willing to bet that you are already using one or both, and/or some modification thereof.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]The Texas rig was probably one of the original weedless hookup rigs for bassin' with worms. It consists of a sliding weight above the hook, and the hook being run through the nose of the worm and then back into the worm to hide the point of the hook. If properly rigged, it snakes through most snags and structure without hanging up, but will stick fish on a hefty hookset, when you jerk the hook point through the worm and into fish flesh.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]The Carolina rig is actually just a variation of the Texas rig. Instead of the sliding sinker bumping up against the eye of the hook, it is rigged with a swivel and then a leader of anywhere from a few inches to as much as six feet after the swivel. Ahead of the swivel, you slip on the weight, leaving the worm or grub to "swim" or crawl more naturally up and over bottom structure.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Some guys use plain old slip sinkers for the weights on either Texas or Carolina rigs. Most use colored weights on the Texas Rigs, to match the color of the plastics they are using. On a Carolina rig, many pros use brass weights and glass beads, to produce a seductive clicking sound as they work the rig across the bottom. The clicking sound is supposed to represent the noises made by crawdads.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]You didn't mention the split shot rig or the drop shot. They are both highly effective in many Utah waters too. The split shot rig is simply pinching a sinker a foot or two above a Texas hooked plastic. Just like the Carolina rig, only without the swivel and sliding sinker. In reasonably snagless waters, a lot of split-shotters hook the plastic through the nose with a light wire hook, with the point exposed. If it gets snaggy, you can change to a regular worm hook nnd rig weedless.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Drop-shotting is a whole nother thang. As many experienced bassers know, it is rigging a sinker on the bottom of the line and then a dropper loop above the sinker. You put a hook on the dropper and rig the plastic either through the nose or in the middle (wacky style). You fish it vertically or with only short casts. It works well when you leave the sinker resting in one place and then shivver and shake the plastic bait up off the bottom.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Anybody wanna talk about pitchin', flippin' rippin' or dippin'? Them bassin' types have a whole diffrunt langridge. Almost as bad as the "fairy wand" contingent.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]I'm probably in trouble with everybody by now. Think I'll just go fishin'.[/#0000ff]
[signature]
[#0000ff][/#0000ff]
[#0000ff]But, to save all that, here's a simplified explanation. I am willing to bet that you are already using one or both, and/or some modification thereof.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]The Texas rig was probably one of the original weedless hookup rigs for bassin' with worms. It consists of a sliding weight above the hook, and the hook being run through the nose of the worm and then back into the worm to hide the point of the hook. If properly rigged, it snakes through most snags and structure without hanging up, but will stick fish on a hefty hookset, when you jerk the hook point through the worm and into fish flesh.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]The Carolina rig is actually just a variation of the Texas rig. Instead of the sliding sinker bumping up against the eye of the hook, it is rigged with a swivel and then a leader of anywhere from a few inches to as much as six feet after the swivel. Ahead of the swivel, you slip on the weight, leaving the worm or grub to "swim" or crawl more naturally up and over bottom structure.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Some guys use plain old slip sinkers for the weights on either Texas or Carolina rigs. Most use colored weights on the Texas Rigs, to match the color of the plastics they are using. On a Carolina rig, many pros use brass weights and glass beads, to produce a seductive clicking sound as they work the rig across the bottom. The clicking sound is supposed to represent the noises made by crawdads.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]You didn't mention the split shot rig or the drop shot. They are both highly effective in many Utah waters too. The split shot rig is simply pinching a sinker a foot or two above a Texas hooked plastic. Just like the Carolina rig, only without the swivel and sliding sinker. In reasonably snagless waters, a lot of split-shotters hook the plastic through the nose with a light wire hook, with the point exposed. If it gets snaggy, you can change to a regular worm hook nnd rig weedless.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Drop-shotting is a whole nother thang. As many experienced bassers know, it is rigging a sinker on the bottom of the line and then a dropper loop above the sinker. You put a hook on the dropper and rig the plastic either through the nose or in the middle (wacky style). You fish it vertically or with only short casts. It works well when you leave the sinker resting in one place and then shivver and shake the plastic bait up off the bottom.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]Anybody wanna talk about pitchin', flippin' rippin' or dippin'? Them bassin' types have a whole diffrunt langridge. Almost as bad as the "fairy wand" contingent.[/#0000ff]
[#0000ff][/#0000ff]
[#0000ff]I'm probably in trouble with everybody by now. Think I'll just go fishin'.[/#0000ff]
[signature]