02-26-2007, 05:10 PM
Montgomery, AL - Tournament fishing is a multi-billion dollar industry and with more and more anglers joining the ranks of competition every day it is a very competitive sport. With spring fishing season just around the corner, Club Tournaments, Divisional Tournaments and Pro Tournaments are about to start up. Competitive anglers are always looking for advantages and secrets to help them "cash in" on the tournament circuit. One of the most important and expensive tools an angler has is their boat, and performance is critical to get the most out of the time spent on the water. Today's competitive anglers have discovered a new advantage, the Blackfinâ„¢ Skeg. By installing this new product, anglers are improving the performance of their boat, protecting their investment, and helping to insure that week after week their boat is ready to compete.
The Blackfinâ„¢ Skeg is made of high impact composite and is easy-to-install, with no drilling or changes to your original boat or motor. In fact, the Blackfinâ„¢ Skeg can be installed in an hour or less, and can be ready for use within 24 hours. The assembly requires the use of a specially designed adhesive that provides a flexible barrier against the walls of the skeg. This results in an absorption void with elastic properties. In the event of an impact; the force is equally distributed in all directions and absorbed by the flexible nature of the Blackfinâ„¢ Skeg. The memory of the high impact composite aided by the adhesive makeup allows the Blackfinâ„¢ Skeg to maintain its original shape at all times. This special adhesive also fills all air voids and creates a bond between the new Skeg and your engine's original skeg.
The unique contoured and tapered design of the Blackfinâ„¢ Skeg balances the flow of water and helps to remove vibration to the lowest point of the engine. The fins channel cleaner water onto the prop. This means there is not only less drag, but there is less chance of a blow out. The bottom node design creates lift at all angles allowing you to use less trim. Additionally, with more surface area, controlling the boat is easier especially at low speed. The design of the bottom node limits the engine from plowing into underwater objects and is shaped to ride over the obstruction and to clear the prop.
Available in three sizes, the new revolutionary Blackfinâ„¢ Skeg protects outboard engines like never before. Additionally, in the event of damage to your original stock skeg the Blackfinâ„¢ Skeg can be used to easily and inexpensively repair the damage as long as one third or more of the original skeg is still intact. The added protection and enhanced performance of the Blackfinâ„¢Skeg make this new product a must have for any boating enthusiast. They are available at Cabela's, and larger marine stores or conveniently online at www.blackfinskeg.com. The suggested retail price is $69.95.
Be sure to "Cash In" this tournament season by preparing your boat for a winning season with a Blackfin Skeg.
For additional information on Blackfinâ„¢ Skeg contact Re: The Outdoors at 334-612-0859.
Blackfinâ„¢ Skeg is one of many products to be launched by Re:The Outdoors, a creative think tank whose sole purpose is to design, produce and promote products that enhance and improve the outdoor experience.
Media Contact:
Karen Lutto (830) 755-4308 karen@luttopr.com
The Blackfinâ„¢ Skeg is made of high impact composite and is easy-to-install, with no drilling or changes to your original boat or motor. In fact, the Blackfinâ„¢ Skeg can be installed in an hour or less, and can be ready for use within 24 hours. The assembly requires the use of a specially designed adhesive that provides a flexible barrier against the walls of the skeg. This results in an absorption void with elastic properties. In the event of an impact; the force is equally distributed in all directions and absorbed by the flexible nature of the Blackfinâ„¢ Skeg. The memory of the high impact composite aided by the adhesive makeup allows the Blackfinâ„¢ Skeg to maintain its original shape at all times. This special adhesive also fills all air voids and creates a bond between the new Skeg and your engine's original skeg.
The unique contoured and tapered design of the Blackfinâ„¢ Skeg balances the flow of water and helps to remove vibration to the lowest point of the engine. The fins channel cleaner water onto the prop. This means there is not only less drag, but there is less chance of a blow out. The bottom node design creates lift at all angles allowing you to use less trim. Additionally, with more surface area, controlling the boat is easier especially at low speed. The design of the bottom node limits the engine from plowing into underwater objects and is shaped to ride over the obstruction and to clear the prop.
Available in three sizes, the new revolutionary Blackfinâ„¢ Skeg protects outboard engines like never before. Additionally, in the event of damage to your original stock skeg the Blackfinâ„¢ Skeg can be used to easily and inexpensively repair the damage as long as one third or more of the original skeg is still intact. The added protection and enhanced performance of the Blackfinâ„¢Skeg make this new product a must have for any boating enthusiast. They are available at Cabela's, and larger marine stores or conveniently online at www.blackfinskeg.com. The suggested retail price is $69.95.
Be sure to "Cash In" this tournament season by preparing your boat for a winning season with a Blackfin Skeg.
For additional information on Blackfinâ„¢ Skeg contact Re: The Outdoors at 334-612-0859.
Blackfinâ„¢ Skeg is one of many products to be launched by Re:The Outdoors, a creative think tank whose sole purpose is to design, produce and promote products that enhance and improve the outdoor experience.
Media Contact:
Karen Lutto (830) 755-4308 karen@luttopr.com