03-07-2016, 02:57 PM
Do any of you know if Lindon Marina has their docks out?
Needing to test run my motor for just an hour or so.
[signature]
Needing to test run my motor for just an hour or so.
[signature]
Lindon boat harbor
|
03-07-2016, 02:57 PM
Do any of you know if Lindon Marina has their docks out?
Needing to test run my motor for just an hour or so. [signature]
03-07-2016, 04:12 PM
Not sure on Lindon, but you can launch at af harbor
[signature]
03-07-2016, 04:17 PM
Thanks?
By chance have you seen a 19' go out the channel safely? [signature]
03-07-2016, 04:17 PM
Lindon never takes there docks out so your good.
[signature]
03-07-2016, 04:33 PM
Thank you!
Do you know if you can take a 19 footer out to the main body safely yet? I doubt the lake has come up much yet pre-runoff? [signature]
03-07-2016, 08:25 PM
I had my boat out yesterday. It's 18 ft and no problem
[signature]
03-07-2016, 08:33 PM
Took my 16' 75 hp Outboard out on Utah Lake last Thursday. Launched at AF and motored to Lindon and all along the north shore to the pump station. depth of open water away from shore was indicating 5-6 feet. AF marina interior was 3-4 feet. churned up some mud in the harbor and at the mouth. did not go into Lindon marina so I don't know the depth there. Open water is deep enough to test your 19'.boat if its an outboard. You might churn up mud coming out of the hole with an I.O. as they draft a little deeper etc. but if you stay away from shore you will probably be ok. Good luck
[signature]
03-07-2016, 09:25 PM
Thanks all!
Will head there in a few days. Hopefully Willard by saturday! [signature] |
« Next Oldest | Next Newest »
|